FAG UC205-13 Deep ball bearings

d:300.000 mm; Fillet Radius rb:1.50 mm; Grease Speed Rating n1:1200 rpm; Basic Static Radial Load Rating Co:1100000 N; B:85.00 mm; D:540.0000 mm; Oil Speed Rating n2:1600 rpm; Fillet Radius ra:4.00 mm; Basic Dynamic Radial Load Rating C:618000 N;

Dimension H1:1.4375 in; Dimension N:0.7500 in; Basic Static Radial Load Rating Co:1750 lbf; Dimension L:5.1250 in; Height H:2.7500 in; Distance JMAX:4.3125 in; Basic Dynamic Radial Load Rating:2520 lbf; Insert Bearing IB:Stainless Steel; Dimension S1:0.7813 in; Dimension N1:0.4531 in;

F:15 mm; Mass inner ring:0.0076 kg; r, r1,2 min.:0.3 mm; B:16 mm; d:12 mm;

B:31 mm; r1s (min):1.5 mm; Dynamic (Ca):162 kN; d2:75 mm; T:33.25 mm; a:30 mm; Pu:26.630 kN; C:27 mm; D:130 mm; r2s (min):0.6 mm;

B:16 mm; d1:65 mm; G:M 75x2; Lock nut:KMFE 15; B1:55 mm; d:75 mm; Hydraulic nut:HMV 15 E; Mass adapter sleeve assembly:0.82 kg; d3:98 mm;

Grease Speed Rating n1:2800 rpm; Oil Speed Rating n2:3800 rpm; Fillet Radius rb:1.00 mm; B:74.00 mm; D:160.0000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:208000 N; Basic Static Radial Load Rating Co:200000 N; d:75.000 mm;

Bearing:22213 E; P60°:50.3 kN; H2:25.4 mm; J min.:206.375 mm; Lock washer:W 13; Labyrinth ring (dc shaft position):LOR 37; P90°:30.2 kN; P150°:16 kN; Bearing limiting speed:7000 r/min; L:279.4 mm;

d:75.000 mm; Grease Speed Rating n1:4300 rpm; Basic Dynamic Radial Load Rating C:153000 N; Basic Static Radial Load Rating Co:122000 N; Fillet Radius ra:2.00 mm; D:160.0000 mm; Oil Speed Rating n2:5000 rpm; Fillet Radius rb:1.00 mm; B:37.00 mm;

Basic Static Radial Load Rating Co:455000 N; Oil Speed Rating n2:2400 rpm; D:240.0000 mm; d:110.000 mm; Fillet Radius rb:1.00 mm; B:100.00 mm; Basic Dynamic Radial Load Rating C:345000 N; Grease Speed Rating n1:1700 rpm; Fillet Radius ra:2.50 mm;

B:144 mm; d:260 mm; Grease:4130 kN; Pu:2370 kN; Static (Cor):16.7 mm; rs (min):4 mm; Oil:345.870 kN; with cylindrical bore:670 min-1; D:440 mm; with tapered bore:790 min-1;

P60°:50.3 kN; Da:120 mm; P150°:16 kN; da:55.563 mm; Stabilizing ring:SR-13-0; N1:19.05 mm; Ca:39.014 mm; Appropriate attachment bolt size G:0.625 in; R1:44.45 mm; Cap bolt, SAE grade:5;

R2:19.05 mm; Initial grease fill:87.885 g; H2:30.163 mm; Taconite seal (db shaft position):TER 47; ba:38.1 mm; PG:1/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; Bearing:22312 E; P180°:20 kN; Cap bolt:2 x 1/2-13 UNC;

Oil:8 400 min-1; Pu:8.740 kN; rs Dynamic (Cr):1.1 mm; d:30 mm; with cylindrical bore:10 000 min-1; B:27 mm; D:72 mm; with tapered bore:2306  ; Grease:0.400 kN; Static (Cor):32.340 kN;

B:56.00 mm; Grease Speed Rating Open/Shielded n1:850 rpm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:325000 N; d:480.000 mm; Basic Static Radial Load Rating Co:560000 N; Oil Speed Rating Open/Shielded n2:1000 rpm; Sealed Speed Rating n3:0 rpm; Accessories:Without Accessories; D:600

Oil Speed Rating Open/Shielded n2:3200 rpm; Grease Speed Rating Open/Shielded n1:2600 rpm; d:105.000 mm; Basic Dynamic Radial Load Rating C:142000 N; Basic Static Radial Load Rating Co:153000 N; Fillet Radius ra:2.00 mm; D:190.0000 mm; Accessories:Snap-Ring; B:36.00 mm;